|
M-audio Trigger Finger Tutorial, How to
Guide and Help!
Setting up Trigger Finger Manually (Not
Using Enigma):
Change Trigger Finger Settings (manually
via the Trigger Finger hardware) - NOT using Enigma
1) Go into edit mode by pressing
the "memory recall" and the "prog/bank change"
buttons simultaneously (the 2 leds by the buttons will start flashing)
2) Tap a pad and use the top,
furthest left knob ("C1/Note/Min") and adjust the value
until you have the desired value for that pad
3) Do step 2 for each pad you
want to set the note value for.
4) After all of your note edits
are complete, hit the "Save & Exit" button once, then
press a pad to specify the memory location you want to save these
edits to (16 pads means up to 16 memory locations saved in the trigger
finger device). Whichever pad you selected is which memory location
you chose to save.
5) You can do steps 1-4 for all
16 memory locations in the trigger finger hardware.
Now celebrate, you just got much further than
90% of the people that bought trigger finger!
** If you want to save more than the 16 presets
that trigger finger can hold, you must follow the steps outlined
in the using the enigma software
section. By using Enigma you can save hundreds of custom banks
(each holding 16 presets) and load them into the Trigger Finger
hardware whenever you want.
eTechDocs.com - Where people, information,
and technology work together
|
